Illuminator 1" Tweeter
ScanSpeak
Type Number:D3004/660000

Features

The Illuminator tweeters continue on with the heritage of the renowned Revelator D29. The large-roll surround and textile dome diaphragm provide a flat frequency response to above 30KHz with outstanding off-axis dispersion.

The face plates are die cast in aluminum for a beautiful look with maximum mechanical stability.

Tymphany’s unique AirCirc Magnet System -- named for the way it optimizes air flow within the chamber – rearranges the traditional magnet structure from a single magnet to an open magnetic circuit comprised of six separate neodymium slugs. This, in combination with the chamber, results in the elimination of the reflections and resonances that compromise the performance of traditional motors. The D3004 gives engineers improved control over critical midrange performance, for superb vocal rendition and excellent imaging at all listening locations.

Driver Highlights: 1" soft dome, AirCirc Magnet System, Black rubber pained aluminium faceplate

Specs

Electrical Data
Nominal Impedance Zn 4 ohm
Minimum Impedance Zmin 9 ohm
Maximum Impedance Zo 18.6 ohm
DC Resistance Re 3 ohm
Voice Coil Inductance Le 0.03 mH
TS Parameters
Resonance Frequency fs 500 Hz
Force Factor Bl 2.3 Tm
Moving Mass Mms 0.35 g
Suspension Compliance Cms 0.29 mm/N
Effective Piston Area sd 7 cm^2
Sensitivity 2.83V/1m 91.6 dB
Power Handling
100h RMS noise test IEC 90 W
Voice Coil and Magnet Parameters
Voice Coil Diameter 26 mm
Voice Coil Height 2.1 mm
Voice Coil Layers 2
Height of the Gap 2.5 mm
Linear Excursion +/- 0.2 mm
Max mech. excursion +/- 1.6 mm
Weight of Magnet 0.3 Kg

Frequency

Mechanical Dimensions

Drawing Dimensions
Outside Diameter OD 104 mm
Flange Thickness FT 5 mm
Cutout Diameter CD 77 mm
Interior Depth ID 23 mm
Hole Diameter HD 4.2 mm
Screw Circle Diameter SD 90 mm