XT/DX
¾″ Tweeter

Type Number: XT19TD00-04

Features:

The goal for this tweeter series was to create a transducer that has a frequency response that is flat to above 20K, and where the distortion is far lower than normal and more friendly to the ear. The tweeters represent a unique approach to tweeter design that has resulted in unrivaled performance, as well as in several patents (Dual Ring Radiator diaphragm, wave-guide center plug).

Driver Highlights: 3/4" tweeter, Dual Ring Radiator diaphragm (Patent), Wave-guide center plug (Patent), copper-clad aluwire

 

Specs:

Electrical Data

Nominal impedance

Zn

4

ohm

Minimum impedance

Zmin

--

ohm

Maximum impedance

Zo

13

ohm

DC resistance

Re

2.9

ohm

Voice coil inductance

Le

0.0115

mH

T-S Parameters

Resonance Frequency

fs

681.9

Hz

Mechanical Q factor

Qms

2.39

Electrical Q factor

Qes

0.82

Total Q factor

Qts

0.61

Force factor

Bl

1.7

Tm

Mechanical resistance

Rms

0.32

Kg/s

Moving mass

Mms

0.2

g

Suspension compliance

Cms

--

mm/N

Effective cone diameter

D

--

cm

Effective piston area

Sd

4.55

cm2

Equivalent volume

Vas

--

ltrs

Sensitivity (2.83V/1m)

89

dB

Power handling

Long-term Max Power (IEC 18.3)

--

W

Short Term Max power (IEC 18.2)

--

W

Voice Coil and Magnet Parameters

Voice coil diameter

19

mm

Voice coil height

1.8

mm

Voice coil layers

--

Height of the gap

2.5

mm

Flux density of gap

--

mWb

Total useful flux

--

mWb

Diameter of magnet

--

mm

Height of magnet

--

mm

Weight of magnet

--

Kg



Notes:
IEC specs refer to IEC 60268-5 third edition
All Tymphany products are RoHS compliant

 

Frequency:XT19TD00-04

Mechanical Dimensions:

Tymphany™ and are trademarks of Tymphany Corporation.  © © 2009, Tymphany Corporation..  All rights reserved.     052110