XT/DX
1″ Tweeter

Type Number: XT25TG30-04

Features:

The goal for this tweeter series was to create a transducer that has a frequency response that is flat to above 20K, and where the distortion is far lower than normal and more friendly to the ear. The tweeters represent a unique approach to tweeter design that has resulted in unrivaled performance, as well as in several patents (Dual Ring Radiator diaphragm, wave-guide center plug).

Driver Highlights: Dual Ring Radiator diaphragm (Patent), Wave-guide center plug (Patent), copper-clad aluwire

 

Specs:

Electrical Data

Nominal impedance

Zn

4

ohm

Minimum impedance

Zmin

--

ohm

Maximum impedance

Zo

19

ohm

DC resistance

Re

2.9

ohm

Voice coil inductance

Le

--

mH

T-S Parameters

Resonance Frequency

fs

530

Hz

Mechanical Q factor

Qms

--

Electrical Q factor

Qes

--

Total Q factor

Qts

--

Force factor

Bl

2.5

Tm

Mechanical resistance

Rms

0.38

Kg/s

Moving mass

Mms

0.3

g

Suspension compliance

Cms

--

mm/N

Effective cone diameter

D

--

cm

Effective piston area

Sd

5.4

cm2

Equivalent volume

Vas

--

ltrs

Sensitivity (2.83V/1m)

91.1

dB

Power handling

Long-term Max Power (IEC 18.3)

--

W

Short Term Max power (IEC 18.2)

--

W

Voice Coil and Magnet Parameters

Voice coil diameter

26

mm

Voice coil height

2.2

mm

Voice coil layers

--

Height of the gap

2.5

mm

Flux density of gap

--

mWb

Total useful flux

--

mWb

Diameter of magnet

--

mm

Height of magnet

--

mm

Weight of magnet

--

Kg



Notes:
IEC specs refer to IEC 60268-5 third edition
All Tymphany products are RoHS compliant

 

Frequency:XT25TG30-04

Mechanical Dimensions:

Tymphany™ and are trademarks of Tymphany Corporation.  © © 2009, Tymphany Corporation..  All rights reserved.     052110