PL
1″ Tweeter

Type Number: PL27TG35-06

Features:

The PL series is designed for the discerning audiophile customer. To meet the needs of this audience, several new technologies were developed with the goal of lowering distortion and damping in the speaker. The coated paper cone reduces vibration and standing waves, and the vented motor system minimizes power compression. The combined result is a very open and dynamic sound.

Driver Highlights: 1" dome tweeter, fabric diaphragm, ferrofluid, double chamber

 

Specs:

Electrical Data

Nominal impedance

Zn

6

ohm

Minimum impedance

Zmin

--

ohm

Maximum impedance

Zo

--

ohm

DC resistance

Re

4.6

ohm

Voice coil inductance

Le

--

mH

T-S Parameters

Resonance Frequency

fs

750

Hz

Mechanical Q factor

Qms

1.17

Electrical Q factor

Qes

0.95

Total Q factor

Qts

0.52

Force factor

Bl

2.7

Tm

Mechanical resistance

Rms

--

Kg/s

Moving mass

Mms

0.32

g

Suspension compliance

Cms

--

mm/N

Effective cone diameter

D

--

cm

Effective piston area

Sd

7.1

cm2

Equivalent volume

Vas

0.01

ltrs

Sensitivity (2.83V/1m)

91

dB

Power handling

Long-term Max Power (IEC 18.3)

225

W

Short Term Max power (IEC 18.2)

450

W

Voice Coil and Magnet Parameters

Voice coil diameter

25

mm

Voice coil height

1.6

mm

Voice coil layers

--

Height of the gap

2

mm

Flux density of gap

--

mWb

Total useful flux

--

mWb

Diameter of magnet

--

mm

Height of magnet

--

mm

Weight of magnet

0.24

Kg



Notes:
IEC specs refer to IEC 60268-5 third edition
All Tymphany products are RoHS compliant

 

Frequency:PL27TG35-06

Mechanical Dimensions:

Tymphany™ and are trademarks of Tymphany Corporation.  © © 2009, Tymphany Corporation..  All rights reserved.     052110