Electrical Data
Nominal impedance	Zn	8	ohm
Minimum impedance	Zmin	7.5	ohm
Maximum impedance	Zo	58.4	ohm
DC resistance	Re	5.9	ohm
Voice coil inductance	Le	0.41	mH

T-S Parameters
Resonance Frequency	fs	31	Hz
Mechanical Q factor	Qms	3.51
Electrical Q factor	Qes	0.37
Total Q factor	Qts	0.33
Force factor	Bl	7.5	Tm
Mechanical resistance	Rms	1	Kg/s
Moving mass	Mms	18	g
Suspension compliance	Cms	1.46	mm/N
Effective cone diameter	D	--	cm
Effective piston area	Sd	154	cm2
Equivalent volume	Vas	49	ltrs
Sensitivity (2.83V/1m)		85.4	dB
Ratio BL/√(Re)		--
Ratio fs/Qts	F	--

Power handling
100h RMS noise test (IEC)	80	W
Long-term Max Power (IEC 18.3)	150	W
Max linear SPL (rms) @ power	--	dB/W
Short Term Max power (IEC 18.2)	--	W

Voice Coil and Magnet Parameters
Voice coil diameter	42	mm
Voice coil height	8	mm
Voice coil layers	4
Height of the gap	20	mm
Linear excursion +/-	9	mm
Max mech. excursion +/-	16	mm
Flux density of gap	--	mWb
Total useful flux	--	mWb
Diameter of magnet	90	mm
Height of magnet	4	mm
Weight of magnet	0.13	Kg

Notes:
IEC specs refer to IEC 60268-5 third edition
All ScanSpeak products are RoHS compliant