Illuminator
1″ Tweeter

Type Number: D3004/602010

Features:

The Illuminator tweeters continue on with the heritage of the renowned Revelator D29. The large-roll surround and textile dome diaphragm provide a flat frequency response to above 30KHz with outstanding off-axis dispersion.

The face plates are die cast in aluminum for a beautiful look with maximum mechanical stability.

D3004/602010 is optimized to offer small package sizes that can fit into tight spaces such as compact cabinets and automotive trim pieces.

The back chamber is die cast in aluminium and designed with a contoured shape that functions as a heat sink in high power applications.

Driver Highlights: 1” soft dome, compact size, ring neodymium magnet, aluminium faceplate and house, protective grill, large chamber.

 

Specs:

Electrical Data

Nominal impedance

Zn

4

ohm

Minimum impedance

Zmin

3.6

ohm

Maximum impedance

Zo

10.1

ohm

DC resistance

Re

3

ohm

Voice coil inductance

Le

0.02

mH

T-S Parameters

Resonance Frequency

fs

425

Hz

Mechanical Q factor

Qms

2.5

Electrical Q factor

Qes

0.97

Total Q factor

Qts

0.7

Force factor

Bl

1.7

Tm

Mechanical resistance

Rms

0.4

Kg/s

Moving mass

Mms

0.35

g

Suspension compliance

Cms

0.4

mm/N

Effective cone diameter

D

--

cm

Effective piston area

Sd

7

cm2

Equivalent volume

Vas

--

ltrs

Sensitivity (2.83V/1m)

89.6

dB

Power handling

100h RMS noise test (IEC)

50

W

Long-term Max Power (IEC 18.3)

130

W

Short Term Max power (IEC 18.2)

--

W

Voice Coil and Magnet Parameters

Voice coil diameter

26

mm

Voice coil height

2.1

mm

Voice coil layers

2

Height of the gap

2.5

mm

Linear excursion +/-

0.2

mm

Max mech. excursion +/-

1.6

mm

Flux density of gap

--

mWb

Total useful flux

--

mWb

Diameter of magnet

42

mm

Height of magnet

4

mm

Weight of magnet

--

Kg



Notes:
IEC specs refer to IEC 60268-5 third edition
All ScanSpeak products are RoHS compliant

 

Frequency:D3004/602010

Mechanical Dimensions:

ScanSpeak™ is a trademark of ScanSpeak Denamrk.  © © 2009, Scanspeak Denamrk..  All rights reserved.     052110