Tymphany LAT 500 " Subwoofer
Tymphany LAT
Type Number:LAT50006001-04

Features

Driver Highlights: The power of two 10” subwoofers in a sleek tube-shaped transducer only 5” wide.

Note: The nominal impedance is calculated with both coils driven in parallel.

PDF
Print
Email

Specs
Electrical Data
Nominal Impedance Zn 4 ohm
Minimum Impedance Zmin 3.2 ohm
Maximum Impedance Zo 46 ohm
DC Resistance Re 3.1 ohm
Voice Coil Inductance Le 1.5 mH
TS Parameters
Resonance Frequency fs 28 Hz
Mechanical Q factor QMS 9
Electrical Q factor QES 0.5
Total Q factor Qts 0.45
Ratio fs/Qts F 61
Force Factor Bl 13 Tm
Mechanical Resistance Rms 3 Kg/s
Moving Mass Mms 160 g
Suspension Compliance Cms 0.21 mm/N
Effective cone diameter D 25.9 cm
Effective Piston Area sd 525 cm^2
Equivalent Volume Vas 81 ltrs
Sensitivity 2.83V/1m 92 dB
Ratio BL/v Re 7.5
Power Handling
100h RMS noise test IEC 250 W
Long-term Max Power IEC 18.3 750 W
Voice Coil and Magnet Parameters
Voice Coil Diameter 38 mm
Voice Coil Height 21.3 mm
Voice Coil Layers 4
Height of the Gap 8 mm
Linear Excursion +/- 6.7 mm
Max mech. excursion +/- 10 mm
Diameter of Magnet 115 mm
Height of Magnet 17.5 mm
Weight of Magnet 2.72 Kg

Frequency

Mechanical Dimensions