Home  > Peerless Drivers  >  Driver Search Results  >  Driver Detail   PLS-P830970
PLS-P830970
PLS-P830970 PLS-P830970 PLS-P830970

PLS-P830970

Platform: Peerless
Driver Type: Full Range
Size: 2 in
Motor: Neodymium
Frame: Plastic Basket
Impedance: 4 Ω
Diaphragm: Al (Aluminium)
Find A Distributor

Frequency & Impedance Response

Graph

Technical Specifications

Driver Size 2 in
DC Resistance 3.6 Ω ±5.0%
Resonant Frequency 165.78 Hz 15%
Half Space Sensitivity @ 2.83V 85.29 dB ±1.01
Sensitivity @ 1W/1m 82.3 dB ±1.01
Rated Noise Power (IEC 268-5 18.1) 25 W
Test Spectrum Bandwidth 150Hz - 20kHz 12 dB/Oct
Effective Piston Area 13.9 cm2
Moving Mass 1.4 g
Motor Force Factor 2.79 T•m
Voice Coil Inner Diameter 25.73 mm
Gap Height 3 mm
Maximum Linear Excursion 1.7 mm
Ferrofluid Type
Minimum Impedance   4.02 Ω ±7.5%
Voice Coil Inductance 0.03 mH
Mechanical Q Factor 3.85
Electrical Q Factor 0.67
Total Q Factor 0.57
Ratio 289.82 fs/Qts
Energy Bandwidth Product ((1/Qes)•fs)
Suspension Compliance 661.1 μm/N
Effective Cone Diameter 4.2 cm
Motor Efficiency Factor 2.2 (T•m2)/Ω
Voice Coil Former Material ASV
Driver Mass 0.14 Kg
Equivalent Volume 0.18 L

Product Info

This 2 inch 4 ohm member of the PLS family sets a high standard for compact full range drivers intended for applications such as television soundbars and compact music systems. Design features in this family include a damped plastic basket with venting under the spider to aid cooling of the motor, a neodymium magnet motor with copper cap to lower coil inductance, providing low distortion at low frequencies and extended high frequency response. A black anodized aluminium cone is employed on the driver, along with a black anodized aluminium dust cap coupled directly to the voice coil. Additionally, the cones come equipped with special-designed large roll rubber surrounds, which allow for a dynamic linear response to high excursion input signals.

Can't find what you'relooking for?

okay let's make it