Home  > Peerless Drivers  >  Driver Search Results  >  Driver Detail   H25TG05-04
H25TG05-04
H25TG05-04 H25TG05-04 H25TG05-04

H25TG05-04

Platform: Tymphany
Driver Type: Tweeter
Size: 25 mm
Motor: Ferrite
Frame: Plastic Waveguide/Horn
Impedance: 4 Ω
Diaphragm: Ti (Titanium)

Frequency & Impedance Response

Graph

Technical Specifications

Driver Size 25 mm
DC Resistance 3.69 Ω ±5.0%
Resonant Frequency 1738.33 Hz 15%
Half Space Sensitivity @ 2.83V 100.56 dB ±1.01
Sensitivity @ 1W/1m 98.1 dB ±1.01
Rated Noise Power (IEC 268-5 18.1) 150 W
Test Spectrum Bandwidth 2KHz-20KHz 12 dB/Oct
Effective Piston Area 5.2 cm2
Moving Mass 0.4 g
Motor Force Factor 2.33 T•m
Voice Coil Inner Diameter 25.4 mm
Gap Height 3 mm
Maximum Linear Excursion 1 mm
Ferrofluid Type
Minimum Impedance   4.55 Ω ±7.5%
Voice Coil Inductance 0.01 mH
Mechanical Q Factor 4.23
Electrical Q Factor 2.66
Total Q Factor 1.63
Ratio 1063.85 fs/Qts
Energy Bandwidth Product ((1/Qes)•fs)
Suspension Compliance 23.5 μm/N
Effective Cone Diameter 2.58 cm
Motor Efficiency Factor 1.5 (T•m2)/Ω
Voice Coil Former Material KSV
Driver Mass 0.56 Kg
Equivalent Volume 0 L

Product Info

This is a 1 inch 4 ohm transducer, member of the H family. This family design features a treated Ti dome, large rear chamber for low resonant frequency, and a ferrofluid cooled the motor. The large motor allow for robust power handling capacity. The tweeter comes with a faceplate with recessed mounting holes, for easy installation into the desired application. The faceplate has a horn geometry for increased sensitivity.


Home  > Peerless Drivers  >  Driver Search Results  >  Driver Detail   H25TG05-04

Can't find what you're looking for?

okay let's make it.