Transducer Size (Millimeters)25
DC Resistance6.57
Resonant Frequency1731.62
Half Space Sensitivity93.99
Rated Noise Power100
Test Spectrum Bandwidth2.5kHz~20kHz

Transducer Size (Millimeters) 25
DC Resistance 6.57 Ω±5.0%
Resonant Frequency 1731.62 Hz15%
Half Space Sensitivity @ 2.83V93.99 dB±1.01
Sensitivity @ 1W/1m94.1 dB±1.01
Rated Noise Power (IEC 268-5 18.1)100 W
Test Spectrum Bandwidth 2.5kHz~20kHz 12 dB/Oc
Effective Piston Area 5.1 cm2
Moving Mass 0.2 g
Motor Force Factor 2.84 T•m
Voice Coil Inner Diameter 25.4 mm
Gap Height 2 mm
Maximum Linear Excursion 0 mm
Ferrofluid Type APG O27N
Minimum Impedance 8.2 Ω±7.5%
Voice Coil Inductance 0.03 mH
Mechanical Q Factor 4.23
Electrical Q Factor 1.83
Total Q Factor 1.28
Ratio 1353.89 fs/Qts
Energy Bandwidth Product ((1/Qes)•fs)
Suspension Compliance 41 μm/N
Effective Cone Diameter 2.55 cm
Motor Efficiency Factor 1.2 (T•m2)/Ω
Voice Coil Former Material KSV
Transducer Mass 0.08 Kg
Equivalent Volume 0 L

This BC family tweeter features a 8 ohm 25 mm voice coil, a damped fabric dome for smooth frequency response performance, a bucking magnet for higher sensitivities, and ferrofluid in the gap of the NdFeB motor, providing enhanced cooling of the voice coil. The tweeter comes with a bucking magnet and a compact faceplate with recessed mounting holes, greatly increasing the sensitivity of the tweeter.A finned heat sink has been added for improved power handling.