DA32TX00-08

Transducer Size (Millimeters)32
DC Resistance6.78
Resonant Frequency573.04
Half Space Sensitivity89.78
Rated Noise Power120
Test Spectrum Bandwidth2K-20KHz

Transducer Size (Millimeters) 32
DC Resistance 6.78 Ω±5.0%
Resonant Frequency 573.04 Hz15%
Half Space Sensitivity @ 2.83V89.78 dB±1.01
Sensitivity @ 1W/1m89.8 dB±1.01
Rated Noise Power (IEC 268-5 18.1)120 W
Test Spectrum Bandwidth 2K-20KHz 12 dB/Oc
Effective Piston Area 12 cm2
Moving Mass 0.5 g
Motor Force Factor 4.29 T•m
Voice Coil Inner Diameter 32.45 mm
Gap Height 4.5 mm
Maximum Linear Excursion 1 mm
Ferrofluid Type N/A
Minimum Impedance 8 Ω±7.5%
Voice Coil Inductance 0.02 mH
Mechanical Q Factor 2.43
Electrical Q Factor 0.72
Total Q Factor 0.56
Ratio 1023.29 fs/Qts
Energy Bandwidth Product ((1/Qes)•fs)
Suspension Compliance 142 μm/N
Effective Cone Diameter 3.9 cm
Motor Efficiency Factor 2.7 (T•m2)/Ω
Voice Coil Former Material AL
Transducer Mass 1.6 Kg
Equivalent Volume 0.03 L

This DA family tweeter features an 8 ohm 1.25 inch voice coil, with Corundum dome, large rear chamber for low resonant frequency, and a ferrite motor with heat sink. The large motor and rear chamber allow for robust power handling capacity. The protective grille can be removed for the highest possible performance, however the dome is very delicate so we recommend the grille is fitted in normal operation.