DFM-2535R00-08

Transducer Size (Millimeters)35.56
DC Resistance6.41
Resonant Frequency763.97
Half Space Sensitivity106.59
Rated Noise Power25
Test Spectrum Bandwidth1.5K - 15K Hz

Transducer Size (Millimeters) 35.56
DC Resistance 6.41 Ω±5.0%
Resonant Frequency 763.97 Hz15%
Half Space Sensitivity @ 2.83V106.59 dB±1.01
Sensitivity @ 1W/1m106.3 dB±1.01
Rated Noise Power (IEC 268-5 18.1)25 W
Test Spectrum Bandwidth 1.5K - 15K Hz 12 dB/Oc
Effective Piston Area 10.9 cm2
Moving Mass 0.6 g
Motor Force Factor 4.18 T•m
Voice Coil Inner Diameter 35.5 mm
Gap Height 3 mm
Maximum Linear Excursion 0.1 mm
Ferrofluid Type
Minimum Impedance 7.47 Ω±7.5%
Voice Coil Inductance 0.03 mH
Mechanical Q Factor 4.6
Electrical Q Factor 0.97
Total Q Factor 0.8
Ratio 954.97 fs/Qts
Energy Bandwidth Product ((1/Qes)•fs)
Suspension Compliance 78.9 μm/N
Effective Cone Diameter 3.72 cm
Motor Efficiency Factor 2.7 (T•m2)/Ω
Voice Coil Former Material ASV
Transducer Mass 1 Kg
Equivalent Volume 0.01 L

This 1.4 inch diaphragm 1inch exit compression driver is for use in high quality sound reinforcement systems. The polyimide surround allows reliable operation in 2 way systems with lower crossover points. The titanium diaphragm is coated with a light, thin layer of unique damping material giving the driver an unusually smooth sound. All of the materials resist environmental factors of heat, vibration and aging ensuring many years of stable performance.