Transducer Size (Millimeters)19
DC Resistance3.21
Resonant Frequency1046.72
Half Space Sensitivity90.12
Rated Noise Power80
Test Spectrum Bandwidth1kHz - 20kHz

Transducer Size (Millimeters) 19
DC Resistance 3.21 Ω±5.0%
Resonant Frequency 1046.72 Hz15%
Half Space Sensitivity @ 2.83V90.12 dB±1.01
Sensitivity @ 1W/1m86.9 dB±1.01
Rated Noise Power (IEC 268-5 18.1)80 W
Test Spectrum Bandwidth 1kHz - 20kHz 12 dB/Oc
Effective Piston Area 4.5 cm2
Moving Mass 0.2 g
Motor Force Factor 1.58 T•m
Voice Coil Inner Diameter 19.3 mm
Gap Height 2 mm
Maximum Linear Excursion 0.1 mm
Ferrofluid Type
Minimum Impedance 3.79 Ω±7.5%
Voice Coil Inductance 0.01 mH
Mechanical Q Factor 8.5
Electrical Q Factor 1.74
Total Q Factor 1.45
Ratio 723.37 fs/Qts
Energy Bandwidth Product ((1/Qes)•fs)
Suspension Compliance 112.5 μm/N
Effective Cone Diameter 2.4 cm
Motor Efficiency Factor 0.8 (T•m2)/Ω
Voice Coil Former Material ASV
Transducer Mass 0.05 Kg
Equivalent Volume 0 L

This DX family tweeter features a 4 ohm 0.75 inch voice coil, a damped silk diaphragm with large surround roll to produce a low resonant frequency, and is mounted in a NdFeB motor. The tweeter also features a rear chamber to create extended low frequency response. The faceplate features recessed mounting holes to minimize reflections.