H25TG05-04

Transducer Size (Millimeters)25
DC Resistance3.69
Resonant Frequency1738.33
Half Space Sensitivity100.56
Rated Noise Power150
Test Spectrum Bandwidth2KHz-20KHz

Transducer Size (Millimeters) 25
DC Resistance 3.69 Ω±5.0%
Resonant Frequency 1738.33 Hz15%
Half Space Sensitivity @ 2.83V100.56 dB±1.01
Sensitivity @ 1W/1m98.1 dB±1.01
Rated Noise Power (IEC 268-5 18.1)150 W
Test Spectrum Bandwidth 2KHz-20KHz 12 dB/Oc
Effective Piston Area 5.2 cm2
Moving Mass 0.4 g
Motor Force Factor 2.33 T•m
Voice Coil Inner Diameter 25.4 mm
Gap Height 3 mm
Maximum Linear Excursion 1 mm
Ferrofluid Type
Minimum Impedance 4.55 Ω±7.5%
Voice Coil Inductance 0.01 mH
Mechanical Q Factor 4.23
Electrical Q Factor 2.66
Total Q Factor 1.63
Ratio 1063.85 fs/Qts
Energy Bandwidth Product ((1/Qes)•fs)
Suspension Compliance 23.5 μm/N
Effective Cone Diameter 2.58 cm
Motor Efficiency Factor 1.5 (T•m2)/Ω
Voice Coil Former Material KSV
Transducer Mass 0.56 Kg
Equivalent Volume 0 L

This is a 1 inch 4 ohm transducer, member of the H family. This family design features a treated Ti dome, large rear chamber for low resonant frequency, and a ferrofluid cooled the motor. The large motor allow for robust power handling capacity. The tweeter comes with a faceplate with recessed mounting holes, for easy installation into the desired application. The faceplate has a horn geometry for increased sensitivity.