H26TG45-06

Transducer Size (Millimeters)25
DC Resistance4.69
Resonant Frequency1018.82
Half Space Sensitivity95.98
Rated Noise Power100
Test Spectrum Bandwidth2.5KHz-20KHz

Transducer Size (Millimeters)25
DC Resistance4.69 Ω±5.0%
Resonant Frequency1018.82 Hz15%
Half Space Sensitivity @ 2.83V95.98 dB±1.01
Sensitivity @ 1W/1m94.6 dB±1.01
Rated Noise Power (IEC 268-5 18.1)100 W
Test Spectrum Bandwidth2.5KHz-20KHz 12 dB/Oc
Effective Piston Area7.1 cm2
Moving Mass0.4 g
Motor Force Factor3.1 T•m
Voice Coil Inner Diameter25.79 mm
Gap Height2.5 mm
Maximum Linear Excursion0.5 mm
Ferrofluid Type
Minimum Impedance5.84 Ω±7.5%
Voice Coil Inductance0.02 mH
Mechanical Q Factor0.98
Electrical Q Factor1.13
Total Q Factor0.53
Ratio1940.6 fs/Qts
Energy Bandwidth Product ((1/Qes)•fs)
Suspension Compliance67.7 μm/N
Effective Cone Diameter3 cm
Motor Efficiency Factor2 (T•m2)/Ω
Voice Coil Former MaterialASV
Transducer Mass0.53 Kg
Equivalent Volume0.01 L

This H family tweeter features a 25 mm 6 ohm voice coil, a treated silk dome, a large rear chamber for low resonant frepuency,and a ferrofluid-cooled ferrite motor. The large motor and rear chamber allows for robust power handling capacity. The tweeter comes with a faceplate with recessed mounting holes, for easy installation into the desired application. The faceplate has a horn geometry for increased sensitivity.