Transducer Size (Millimeters)101.6
DC Resistance5.25
Resonant Frequency88.61
Half Space Sensitivity86.12
Rated Noise Power30
Test Spectrum Bandwidth20Hz - 5kHz

Transducer Size (Millimeters) 101.6
DC Resistance 5.25 Ω±5.0%
Resonant Frequency 88.61 Hz15%
Half Space Sensitivity @ 2.83V86.12 dB±1.01
Sensitivity @ 1W/1m84.7 dB±1.01
Rated Noise Power (IEC 268-5 18.1)30 W
Test Spectrum Bandwidth 20Hz - 5kHz 12 dB/Oc
Effective Piston Area 56.1 cm2
Moving Mass 5.9 g
Motor Force Factor 4.91 T•m
Voice Coil Inner Diameter 25.73 mm
Gap Height 6 mm
Maximum Linear Excursion 3 mm
Ferrofluid Type
Minimum Impedance 5.75 Ω±7.5%
Voice Coil Inductance 0.24 mH
Mechanical Q Factor 2.95
Electrical Q Factor 0.72
Total Q Factor 0.58
Ratio 153.83 fs/Qts
Energy Bandwidth Product ((1/Qes)•fs)
Suspension Compliance 545.9 μm/N
Effective Cone Diameter 8.45 cm
Motor Efficiency Factor 4.6 (T•m2)/Ω
Voice Coil Former Material ASV
Transducer Mass 0.91 Kg
Equivalent Volume 2.41 L

This 4 inch 8 ohm driver is a member of the high performance HDS family. A powerful ferrite magnet system is coupled to a finite element analysis designed suspension system, containing both a linear spider design and a rubber surround. The motor contains an aluminium shorting ring, which reduces coil inductance, thus providing both extended frequency response performance and reduced distortion. The long-throw voice coil ensures linear high excursion performance, needed for signal clarity. The cone necks are vented so as to reduce air compression effects under high excursion conditions. The cast aluminium basket offers structural rigidity, heat sinking capacity for the motor, and additional air venting under the spider so as to again reduce air compression effects. The cone in this model is a glass fibre composite, offering a unique visual and acoustic experience.