NE19VTA-04

Transducer Size (Millimeters)19
DC Resistance2.54
Resonant Frequency774.78
Half Space Sensitivity89.38
Rated Noise Power100
Test Spectrum Bandwidth2.5kHz - 20kHz

Transducer Size (Millimeters)19
DC Resistance2.54 Ω±5.0%
Resonant Frequency774.78 Hz15%
Half Space Sensitivity @ 2.83V89.38 dB±1.01
Sensitivity @ 1W/1m85.3 dB±1.01
Rated Noise Power (IEC 268-5 18.1)100 W
Test Spectrum Bandwidth2.5kHz - 20kHz 12 dB/Oc
Effective Piston Area4.9 cm2
Moving Mass0.2 g
Motor Force Factor1.22 T•m
Voice Coil Inner Diameter19.3 mm
Gap Height2 mm
Maximum Linear Excursion0.1 mm
Ferrofluid Type
Minimum Impedance3.14 Ω±7.5%
Voice Coil Inductance0.01 mH
Mechanical Q Factor2.85
Electrical Q Factor1.72
Total Q Factor1.07
Ratio723.41 fs/Qts
Energy Bandwidth Product ((1/Qes)•fs)
Suspension Compliance204.7 μm/N
Effective Cone Diameter2.5 cm
Motor Efficiency Factor0.6 (T•m2)/Ω
Voice Coil Former MaterialASV
Transducer Mass0.06 Kg
Equivalent Volume0.01 L

The NE family has leading-edge transducer technology packaged in a cutting edge, stylistic design. The 4 ohm 19 mm tweeters in this family feature finite element analysis designed Neodymium-Iron-Boron magnet (NdFeB) motors, with copper caps for extended frequency response and reduced distortion. The aluminium rear chambers offer extended low frequency performance, while doubling as heat sinking. The butterfly supporting the tweeter diaphragm is made of a high temperature plastic, consistent with the product�s high temperature performance rating, and features supporting terminals. The dome material in this design is aluminum, and the design has been optimized for sound quality and clarity. Rounding out the design is an aluminium face plate and plastic grille, which offers protection for the tweeter diaphragm.