Transducer Size (Millimeters)25
DC Resistance3.16
Resonant Frequency727.95
Half Space Sensitivity89.61
Rated Noise Power80
Test Spectrum Bandwidth2kHz - 20kHz

Transducer Size (Millimeters) 25
DC Resistance 3.16 Ω±5.0%
Resonant Frequency 727.95 Hz15%
Half Space Sensitivity @ 2.83V89.61 dB±1.01
Sensitivity @ 1W/1m86.5 dB±1.01
Rated Noise Power (IEC 268-5 18.1)80 W
Test Spectrum Bandwidth 2kHz - 20kHz 12 dB/Oc
Effective Piston Area 8 cm2
Moving Mass 0.4 g
Motor Force Factor 2.1 T•m
Voice Coil Inner Diameter 25.76 mm
Gap Height 2 mm
Maximum Linear Excursion 0.1 mm
Ferrofluid Type
Minimum Impedance 3.93 Ω±7.5%
Voice Coil Inductance 0.01 mH
Mechanical Q Factor 4.64
Electrical Q Factor 1.2
Total Q Factor 0.95
Ratio 765.46 fs/Qts
Energy Bandwidth Product ((1/Qes)•fs)
Suspension Compliance 131.7 μm/N
Effective Cone Diameter 3.2 cm
Motor Efficiency Factor 1.4 (T•m2)/Ω
Voice Coil Former Material ASV
Transducer Mass 0.1 Kg
Equivalent Volume 0.01 L

The NE family has leading-edge transducer technology packaged in a cutting edge, stylistic design. The 4 ohm 25 mm tweeters in this family feature finite element analysis designed Neodymium-Iron-Boron magnet (NdFeB) motors, with copper caps for extended frequency response and reduced distortion. The aluminium rear chambers offer extended low frequency performance, while doubling as heat sinking. The butterfly supporting the tweeter diaphragm is made of a high temperature plastic, consistent with the products high temperature performance rating, and features supporting terminals. The dome material in this design is deep anodized aluminum, and the design has been optimized for sound quality and clarity. Rounding out the design is an aluminium face plate and plastic grille, which offers protection for the tweeter diaphragm.