PLS-50F25AL03-04

Transducer Size (Millimeters)50.8
DC Resistance3.43
Resonant Frequency191.31
Half Space Sensitivity84.47
Rated Noise Power7
Test Spectrum Bandwidth150Hz~20KHz

Transducer Size (Millimeters) 50.8
DC Resistance 3.43 Ω±5.0%
Resonant Frequency 191.31 Hz15%
Half Space Sensitivity @ 2.83V84.47 dB±1.01
Sensitivity @ 1W/1m81.9 dB±1.01
Rated Noise Power (IEC 268-5 18.1)7 W
Test Spectrum Bandwidth 150Hz~20KHz 12 dB/Oc
Effective Piston Area 15.2 cm2
Moving Mass 1.4 g
Motor Force Factor 2.44 T•m
Voice Coil Inner Diameter 25.73 mm
Gap Height 3 mm
Maximum Linear Excursion 1.7 mm
Ferrofluid Type N/A
Minimum Impedance 4.45 Ω±7.5%
Voice Coil Inductance 0.03 mH
Mechanical Q Factor 3.73
Electrical Q Factor 0.99
Total Q Factor 0.78
Ratio 245.58 fs/Qts
Energy Bandwidth Product ((1/Qes)•fs)
Suspension Compliance 485.4 μm/N
Effective Cone Diameter 4.4 cm
Motor Efficiency Factor 1.7 (T•m2)/Ω
Voice Coil Former Material ASV
Transducer Mass 0.32 Kg
Equivalent Volume 0.16 L

This 2 inch 4 ohm member of the PLS family sets a high standard for compact full range drivers intended for applications such as television soundbars and compact music systems. Design features in this family include a stiff steel basket with venting under the spider to aid cooling of the motor, a ferrite magnet motor with copper cap to lower coil inductance, providing low distortion at low frequencies and extended high frequency response. A black anodized aluminium cone is employed, along with a black anodized aluminium dust cap coupled directly to the voice coil. Additionally, the cones come equipped with special-designed large roll rubber surrounds, which allow for a dynamic linear response at high excursion.