PLS-50N25AL01-08

Transducer Size (Millimeters)50.8
DC Resistance6.15
Resonant Frequency161.02
Half Space Sensitivity83.44
Rated Noise Power10
Test Spectrum Bandwidth150~20KHz

Transducer Size (Millimeters)50.8
DC Resistance6.15 Ω±5.0%
Resonant Frequency161.02 Hz15%
Half Space Sensitivity @ 2.83V83.44 dB±1.01
Sensitivity @ 1W/1m82.8 dB±1.01
Rated Noise Power (IEC 268-5 18.1)10 W
Test Spectrum Bandwidth150~20KHz 12 dB/Oc
Effective Piston Area15.2 cm2
Moving Mass1.6 g
Motor Force Factor3.38 T•m
Voice Coil Inner Diameter25.73 mm
Gap Height3 mm
Maximum Linear Excursion1.7 mm
Ferrofluid Type
Minimum Impedance6.91 Ω±7.5%
Voice Coil Inductance0.04 mH
Mechanical Q Factor4.94
Electrical Q Factor0.89
Total Q Factor0.76
Ratio213.22 fs/Qts
Energy Bandwidth Product ((1/Qes)•fs)
Suspension Compliance599.9 μm/N
Effective Cone Diameter4.4 cm
Motor Efficiency Factor1.9 (T•m2)/Ω
Voice Coil Former MaterialASV
Transducer Mass0.14 Kg
Equivalent Volume0.2 L

This 2 inch 8 ohm member of the PLS family sets a high standard, for compact full range drivers intended for applications such as television soundbars and compact music systems. Design features in this family include a damped plastic basket with venting under the spider to aid cooling of the motor, a neodymium magnet motor with copper cap to lower coil inductance, providing low distortion at low frequencies and extended high frequency response. A black anodized aluminium cone is employed on the driver, along with a black anodized aluminium dust cap coupled directly to the voice coil. Additionally, the cones come equipped with special-designed large roll rubber surrounds, which allow for a dynamic linear response to high excursion input signals.