PLS-75F25AL03-08

Transducer Size (Millimeters)76.2
DC Resistance6.22
Resonant Frequency111.16
Half Space Sensitivity84.48
Rated Noise Power25
Test Spectrum Bandwidth100Hz~20KHz

Transducer Size (Millimeters) 76.2
DC Resistance 6.22 Ω±5.0%
Resonant Frequency 111.16 Hz15%
Half Space Sensitivity @ 2.83V84.48 dB±1.01
Sensitivity @ 1W/1m84.1 dB±1.01
Rated Noise Power (IEC 268-5 18.1)25 W
Test Spectrum Bandwidth 100Hz~20KHz 12 dB/Oc
Effective Piston Area 28.3 cm2
Moving Mass 2.4 g
Motor Force Factor 3.65 T•m
Voice Coil Inner Diameter 25.73 mm
Gap Height 5 mm
Maximum Linear Excursion 1.6 mm
Ferrofluid Type
Minimum Impedance 7.39 Ω±7.5%
Voice Coil Inductance 0.05 mH
Mechanical Q Factor 5.93
Electrical Q Factor 0.8
Total Q Factor 0.7
Ratio 158.13 fs/Qts
Energy Bandwidth Product ((1/Qes)•fs)
Suspension Compliance 836.9 μm/N
Effective Cone Diameter 6 cm
Motor Efficiency Factor 2.1 (T•m2)/Ω
Voice Coil Former Material ASV
Transducer Mass 0.38 Kg
Equivalent Volume 1 L

This 3 inch 8 ohm member of the PLS family sets a high standard, for compact full range drivers intended for applications such as television soundbars and compact music systems. Design features in this family include a stiff steel basket with venting under the spider to aid cooling of the motor, a ferrite magnet motor with copper cap to lower coil inductance, providing low distortion at low frequencies and extended high frequency response. A black anodized aluminium cone is employed on the driver, along with a black anodized aluminium dust cap coupled directly to the voice coil. Additionally, the cones come equipped with special-designed large roll rubber surrounds, which allow for a dynamic linear response to high excursion input signals.