PLS-75F25AL05-08

Transducer Size (Millimeters)76.2
DC Resistance6.22
Resonant Frequency106.89
Half Space Sensitivity84.87
Rated Noise Power25
Test Spectrum Bandwidth100Hz~20KHz

Transducer Size (Millimeters)76.2
DC Resistance6.22 Ω±5.0%
Resonant Frequency106.89 Hz15%
Half Space Sensitivity @ 2.83V84.87 dB±1.01
Sensitivity @ 1W/1m84.5 dB±1.01
Rated Noise Power (IEC 268-5 18.1)25 W
Test Spectrum Bandwidth100Hz~20KHz 12 dB/Oc
Effective Piston Area28.3 cm2
Moving Mass2.4 g
Motor Force Factor3.64 T•m
Voice Coil Inner Diameter25.73 mm
Gap Height4 mm
Maximum Linear Excursion2.1 mm
Ferrofluid Type
Minimum Impedance7.42 Ω±7.5%
Voice Coil Inductance0.04 mH
Mechanical Q Factor5.2
Electrical Q Factor0.75
Total Q Factor0.66
Ratio162.45 fs/Qts
Energy Bandwidth Product ((1/Qes)•fs)
Suspension Compliance927.1 μm/N
Effective Cone Diameter6 cm
Motor Efficiency Factor2.1 (T•m2)/Ω
Voice Coil Former MaterialASV
Transducer Mass0 Kg
Equivalent Volume1.11 L

This 3 inch 8 ohm member of the PLS family sets a high standard for compact full range drivers intended for applications such as television soundbars and compact music systems. Design features in this family include a stiff steel basket with venting under the spider to aid cooling of the motor, a ferrite magnet motor with copper cap to lower coil inductance, providing low distortion at low frequencies and extended high frequency response. A black anodized aluminium cone is employed, along with a black anodized aluminium dust cap coupled directly to the voice coil. Additionally, the cones come equipped with special-designed large roll rubber surrounds, which allow for a dynamic linear response at high excursion.