PLS-75N25AL02-04

Transducer Size (Millimeters)76.2
DC Resistance3.65
Resonant Frequency96.06
Half Space Sensitivity86.26
Rated Noise Power25
Test Spectrum Bandwidth100Hz-20KHz

Transducer Size (Millimeters)76.2
DC Resistance3.65 Ω±5.0%
Resonant Frequency96.06 Hz15%
Half Space Sensitivity @ 2.83V86.26 dB±1.01
Sensitivity @ 1W/1m83.7 dB±1.01
Rated Noise Power (IEC 268-5 18.1)25 W
Test Spectrum Bandwidth100Hz-20KHz 12 dB/Oc
Effective Piston Area28.3 cm2
Moving Mass2.6 g
Motor Force Factor2.72 T•m
Voice Coil Inner Diameter25.73 mm
Gap Height4 mm
Maximum Linear Excursion2.3 mm
Ferrofluid Type
Minimum Impedance4.41 Ω±7.5%
Voice Coil Inductance0.05 mH
Mechanical Q Factor5.76
Electrical Q Factor0.76
Total Q Factor0.67
Ratio142.95 fs/Qts
Energy Bandwidth Product ((1/Qes)•fs)
Suspension Compliance1073.7 μm/N
Effective Cone Diameter6 cm
Motor Efficiency Factor2 (T•m2)/Ω
Voice Coil Former MaterialASV
Transducer Mass0.21 Kg
Equivalent Volume1.13 L

This 2.5 inch 4 ohm member of the PLS family sets a high standard for compact full range drivers intended for applications such as television soundbars and compact music systems. Design features in this family include a damped plastic basket with venting under the spider to aid cooling of the motor, a neodymium magnet motor with copper cap to lower coil inductance, providing low distortion at low frequencies and extended high frequency response. A black anodized aluminium cone is employed, along with a black anodized aluminium dust cap coupled directly to the voice coil. Additionally, the cones come equipped with special-designed large roll rubber surrounds, which allow for a dynamic linear response at high excursion.