PLS-75N25AL02-08

Transducer Size (Millimeters)76.2
DC Resistance6.1
Resonant Frequency99.39
Half Space Sensitivity84.66
Rated Noise Power25
Test Spectrum Bandwidth100Hz-20KHz

Transducer Size (Millimeters)76.2
DC Resistance6.1 Ω±5.0%
Resonant Frequency99.39 Hz15%
Half Space Sensitivity @ 2.83V84.66 dB±1.01
Sensitivity @ 1W/1m84.4 dB±1.01
Rated Noise Power (IEC 268-5 18.1)25 W
Test Spectrum Bandwidth100Hz-20KHz 12 dB/Oc
Effective Piston Area28.9 cm2
Moving Mass2.5 g
Motor Force Factor3.42 T•m
Voice Coil Inner Diameter25.73 mm
Gap Height4 mm
Maximum Linear Excursion2.1 mm
Ferrofluid Type
Minimum Impedance7.5 Ω±7.5%
Voice Coil Inductance0.05 mH
Mechanical Q Factor4.72
Electrical Q Factor0.83
Total Q Factor0.71
Ratio140.58 fs/Qts
Energy Bandwidth Product ((1/Qes)•fs)
Suspension Compliance1006.5 μm/N
Effective Cone Diameter6.7 cm
Motor Efficiency Factor1.9 (T•m2)/Ω
Voice Coil Former MaterialASV
Transducer Mass0.21 Kg
Equivalent Volume1.29 L

This 3 inch 8 ohm member of the PLS family sets a high standard, for compact full range drivers intended for applications such as television soundbars and compact music systems. Design features in this family include a damped plastic basket with venting under the spider to aid cooling of the motor, a neodymium magnet motor with copper cap to lower coil inductance, providing low distortion at low frequencies and extended high frequency response. A black anodized aluminium cone is employed on the driver, along with a black anodized aluminium dust cap coupled directly to the voice coil. Additionally, the cones come equipped with special-designed large roll rubber surrounds, which allow for a dynamic linear response to high excursion input signals.