PLS-P830985

Transducer Size (Millimeters)63.5
DC Resistance3.63
Resonant Frequency117.16
Half Space Sensitivity85.4
Rated Noise Power30
Test Spectrum Bandwidth100Hz - 20kHz

Transducer Size (Millimeters) 63.5
DC Resistance 3.63 Ω±5.0%
Resonant Frequency 117.16 Hz15%
Half Space Sensitivity @ 2.83V85.4 dB±1.01
Sensitivity @ 1W/1m82.3 dB±1.01
Rated Noise Power (IEC 268-5 18.1)30 W
Test Spectrum Bandwidth 100Hz - 20kHz 12 dB/Oc
Effective Piston Area 21.2 cm2
Moving Mass 1.9 g
Motor Force Factor 2.61 T•m
Voice Coil Inner Diameter 25.73 mm
Gap Height 3 mm
Maximum Linear Excursion 1.7 mm
Ferrofluid Type
Minimum Impedance 3.95 Ω±7.5%
Voice Coil Inductance 0.03 mH
Mechanical Q Factor 4.08
Electrical Q Factor 0.75
Total Q Factor 0.63
Ratio 184.79 fs/Qts
Energy Bandwidth Product ((1/Qes)•fs)
Suspension Compliance 963 μm/N
Effective Cone Diameter 5.2 cm
Motor Efficiency Factor 1.9 (T•m2)/Ω
Voice Coil Former Material ASV
Transducer Mass 0.14 Kg
Equivalent Volume 0.61 L

This 2.5 inch 4 ohm member of the PLS family sets a high standard for compact full range drivers intended for applications such as television soundbars and compact music systems. Design features in this family include a damped plastic basket with venting under the spider to aid cooling of the motor, a neodymium magnet motor with copper cap to lower coil inductance, providing low distortion at low frequencies and extended high frequency response. A black anodized aluminium cone is employed on the driver, along with a black anodized aluminium dust cap coupled directly to the voice coil. Additionally, the cones come equipped with special-designed large roll rubber surrounds, which allow for a dynamic linear response to high excursion input signals.