PLS-P830986

Transducer Size (Millimeters)76.2
DC Resistance6.22
Resonant Frequency105.05
Half Space Sensitivity84.02
Rated Noise Power25
Test Spectrum Bandwidth100Hz - 20kHz

Transducer Size (Millimeters)76.2
DC Resistance6.22 Ω±5.0%
Resonant Frequency105.05 Hz15%
Half Space Sensitivity @ 2.83V84.02 dB±1.01
Sensitivity @ 1W/1m83.2 dB±1.01
Rated Noise Power (IEC 268-5 18.1)25 W
Test Spectrum Bandwidth100Hz - 20kHz 12 dB/Oc
Effective Piston Area27.3 cm2
Moving Mass2.6 g
Motor Force Factor3.43 T•m
Voice Coil Inner Diameter25.73 mm
Gap Height4 mm
Maximum Linear Excursion2.1 mm
Ferrofluid Type
Minimum Impedance6.62 Ω±7.5%
Voice Coil Inductance0.05 mH
Mechanical Q Factor5.15
Electrical Q Factor0.89
Total Q Factor0.76
Ratio137.86 fs/Qts
Energy Bandwidth Product ((1/Qes)•fs)
Suspension Compliance897.1 μm/N
Effective Cone Diameter5.9 cm
Motor Efficiency Factor1.9 (T•m2)/Ω
Voice Coil Former MaterialASV
Transducer Mass0.21 Kg
Equivalent Volume0.94 L

This 3 inch 8 ohm member of the PLS family sets a high standard for compact full range drivers intended for applications such as television soundbars and compact music systems. Design features in this family include a damped plastic basket with venting under the spider to aid cooling of the motor, a neodymium magnet motor with copper cap to lower coil inductance, providing low distortion at low frequencies and extended high frequency response. A black anodized aluminium cone is employed on the driver, along with a black anodized aluminium dust cap coupled directly to the voice coil. Additionally, the cones come equipped with special-designed large roll rubber surrounds, which allow for a dynamic linear response to high excursion input signals