PLS-P830987

Transducer Size (Millimeters)76.2
DC Resistance6.15
Resonant Frequency107.97
Half Space Sensitivity83.56
Rated Noise Power25
Test Spectrum Bandwidth100Hz - 20kHz

Transducer Size (Millimeters)76.2
DC Resistance6.15 Ω±5.0%
Resonant Frequency107.97 Hz15%
Half Space Sensitivity @ 2.83V83.56 dB±1.01
Sensitivity @ 1W/1m82.6 dB±1.01
Rated Noise Power (IEC 268-5 18.1)25 W
Test Spectrum Bandwidth100Hz - 20kHz 12 dB/Oc
Effective Piston Area28.8 cm2
Moving Mass2.5 g
Motor Force Factor3 T•m
Voice Coil Inner Diameter25.73 mm
Gap Height4 mm
Maximum Linear Excursion2.1 mm
Ferrofluid Type
Minimum Impedance6.43 Ω±7.5%
Voice Coil Inductance0.05 mH
Mechanical Q Factor6.19
Electrical Q Factor1.14
Total Q Factor0.97
Ratio111.89 fs/Qts
Energy Bandwidth Product ((1/Qes)•fs)
Suspension Compliance882.7 μm/N
Effective Cone Diameter6.05 cm
Motor Efficiency Factor1.5 (T•m2)/Ω
Voice Coil Former MaterialASV
Transducer Mass0.22 Kg
Equivalent Volume1.03 L

This 3 inch 8 ohm member of the PLS family sets a high standard, for compact full range drivers intended for applications such as television soundbars and compact music systems. Design features in this family include a damped plastic basket with venting under the spider to aid cooling of the motor, a neodymium magnet motor with copper cap to lower coil inductance, providing low distortion at low frequencies and extended high frequency response. A black anodized aluminium cone is employed on the driver, along with a black anodized aluminium dust cap coupled directly to the voice coil. Additionally, the cones come equipped with special-designed large roll rubber surrounds, which allow for a dynamic linear response to high excursion input signals.