SLS-85S25CP04-04

Transducer Size (Millimeters)88.9
DC Resistance3.18
Resonant Frequency72.57
Half Space Sensitivity85.98
Rated Noise Power30
Test Spectrum BandwidthFs-2.5KHZ

Transducer Size (Millimeters) 88.9
DC Resistance 3.18 Ω±5.0%
Resonant Frequency 72.57 Hz15%
Half Space Sensitivity @ 2.83V85.98 dB±1.01
Sensitivity @ 1W/1m83.3 dB±1.01
Rated Noise Power (IEC 268-5 18.1)30 W
Test Spectrum Bandwidth Fs-2.5KHZ 12 dB/Oc
Effective Piston Area 30.8 cm2
Moving Mass 4.7 g
Motor Force Factor 4.31 T•m
Voice Coil Inner Diameter 25.73 mm
Gap Height 6 mm
Maximum Linear Excursion 4.5 mm
Ferrofluid Type
Minimum Impedance 4.37 Ω±7.5%
Voice Coil Inductance 0.16 mH
Mechanical Q Factor 5.38
Electrical Q Factor 0.37
Total Q Factor 0.35
Ratio 210.34 fs/Qts
Energy Bandwidth Product ((1/Qes)•fs)
Suspension Compliance 1017.5 μm/N
Effective Cone Diameter 6.26 cm
Motor Efficiency Factor 5.9 (T•m2)/Ω
Voice Coil Former Material KSV
Transducer Mass 0.88 Kg
Equivalent Volume 1.39 L

The SLS line combines high quality performance with an affordable design. This 3.5 inch 4 ohm member of the SLS family features a rigid steel basket, a coated paper cone, and a ferrite magnet motor with aluminium shorting ring for improved distortion performance.