TA6FC00-04

Transducer Size (Millimeters)50.8
DC Resistance3.38
Resonant Frequency177.55
Half Space Sensitivity85.31
Rated Noise Power10
Test Spectrum Bandwidth100hz-20Khz

Transducer Size (Millimeters) 50.8
DC Resistance 3.38 Ω±5.0%
Resonant Frequency 177.55 Hz15%
Half Space Sensitivity @ 2.83V85.31 dB±1.01
Sensitivity @ 1W/1m82.4 dB±1.01
Rated Noise Power (IEC 268-5 18.1)10 W
Test Spectrum Bandwidth 100hz-20Khz 12 dB/Oc
Effective Piston Area 15.2 cm2
Moving Mass 1.4 g
Motor Force Factor 2.12 T•m
Voice Coil Inner Diameter 19.32 mm
Gap Height 3 mm
Maximum Linear Excursion 1.1 mm
Ferrofluid Type
Minimum Impedance 4.08 Ω±7.5%
Voice Coil Inductance 0.03 mH
Mechanical Q Factor 2.63
Electrical Q Factor 1.14
Total Q Factor 0.79
Ratio 223.9 fs/Qts
Energy Bandwidth Product ((1/Qes)•fs)
Suspension Compliance 595.4 μm/N
Effective Cone Diameter 4.4 cm
Motor Efficiency Factor 1.3 (T•m2)/Ω
Voice Coil Former Material ASV
Transducer Mass 0.08 Kg
Equivalent Volume 0.19 L

This 2 inch 4 ohm member of the new TA family sets a high standard for compact full range drivers. Intended for applications such as television soundbars and other compact applications in mind. Design features in this family include a stiff steel basket with venting under the spider to aid cooling of the motor, a NdFeB magnet motor with copper cap to lower coil inductance, providing low distortion at low frequencies and extended high frequency response. A black anodized aluminium cone and a black anodized aluminium dust cap are employed on the driver, coupled directly to the voice coil.