TA6FD00-04

Transducer Size (Millimeters)50.8
DC Resistance3.47
Resonant Frequency146.6
Half Space Sensitivity84.08
Rated Noise Power10
Test Spectrum Bandwidth100Hz-20KHz

Transducer Size (Millimeters)50.8
DC Resistance3.47 Ω±5.0%
Resonant Frequency146.6 Hz15%
Half Space Sensitivity @ 2.83V84.08 dB±1.01
Sensitivity @ 1W/1m81.1 dB±1.01
Rated Noise Power (IEC 268-5 18.1)10 W
Test Spectrum Bandwidth100Hz-20KHz 12 dB/Oc
Effective Piston Area15.2 cm2
Moving Mass1.4 g
Motor Force Factor1.93 T•m
Voice Coil Inner Diameter19.32 mm
Gap Height3 mm
Maximum Linear Excursion1 mm
Ferrofluid Type
Minimum Impedance3.99 Ω±7.5%
Voice Coil Inductance0.02 mH
Mechanical Q Factor3.78
Electrical Q Factor1.24
Total Q Factor0.93
Ratio157.3 fs/Qts
Energy Bandwidth Product ((1/Qes)•fs)
Suspension Compliance822.1 μm/N
Effective Cone Diameter4.4 cm
Motor Efficiency Factor1.1 (T•m2)/Ω
Voice Coil Former MaterialASV
Transducer Mass0.17 Kg
Equivalent Volume0.27 L

This 2 inch 4 ohm member of the new TA family sets a high standard for compact full range drivers. Intended for applications such as television soundbars and other compact applications in mind. Design features in this family include a stiff steel basket with venting under the spider to aid cooling of the motor, a ferrite magnet motor with copper cap to lower coil inductance, providing low distortion at low frequencies and extended high frequency response. A black anodized aluminium cone and a black anodized aluminium dust cap are employed on the driver, coupled directly to the voice coil.