XXLS-P835016

Transducer Size (Millimeters)254
DC Resistance2.46
Resonant Frequency26.07
Half Space Sensitivity88.98
Rated Noise Power100
Test Spectrum Bandwidth20Hz - 4kHz

Transducer Size (Millimeters) 254
DC Resistance 2.46 Ω±5.0%
Resonant Frequency 26.07 Hz15%
Half Space Sensitivity @ 2.83V88.98 dB±1.01
Sensitivity @ 1W/1m85.2 dB±1.01
Rated Noise Power (IEC 268-5 18.1)100 W
Test Spectrum Bandwidth 20Hz - 4kHz 12 dB/Oc
Effective Piston Area 356.3 cm2
Moving Mass 102.1 g
Motor Force Factor 10.36 T•m
Voice Coil Inner Diameter 51 mm
Gap Height 8 mm
Maximum Linear Excursion 12.3 mm
Ferrofluid Type
Minimum Impedance 3.35 Ω±7.5%
Voice Coil Inductance 0.51 mH
Mechanical Q Factor 11.27
Electrical Q Factor 0.38
Total Q Factor 0.37
Ratio 70.46 fs/Qts
Energy Bandwidth Product ((1/Qes)•fs)
Suspension Compliance 365 μm/N
Effective Cone Diameter 21.3 cm
Motor Efficiency Factor 43.7 (T•m2)/Ω
Voice Coil Former Material GSV
Transducer Mass 6.14 Kg
Equivalent Volume 65.09 L

This 10 inch 4 ohm member of the XXLS product family has all the design features suitable for a high performance, high excursion subwoofer driver. The motor features a double ferrite magnet motor, supporting high excursion, and aluminium shorting rings and pole extenders, lowering and linearizing the inductance of the overhung voice coil. The Aluminium cone is vented under the dust cap, to reduce air compression. The suspension system features a low-creep rubber surround, and a nomex spider, ensuring long-term reliability under high power conditions. The product also features a rigid cast aluminium basket.