Transducer Size (Millimeters)63.5
DC Resistance3.43
Resonant Frequency112.07
Half Space Sensitivity84.99
Rated Noise Power25
Test Spectrum Bandwidth100~20KHz

Transducer Size (Millimeters) 63.5
DC Resistance 3.43 Ω±5.0%
Resonant Frequency 112.07 Hz15%
Half Space Sensitivity @ 2.83V84.99 dB±1.01
Sensitivity @ 1W/1m82.2 dB±1.01
Rated Noise Power (IEC 268-5 18.1)25 W
Test Spectrum Bandwidth 100~20KHz 12 dB/Oc
Effective Piston Area 21.2 cm2
Moving Mass 2.1 g
Motor Force Factor 2.45 T•m
Voice Coil Inner Diameter 25.73 mm
Gap Height 3 mm
Maximum Linear Excursion 1.7 mm
Ferrofluid Type
Minimum Impedance 4.26 Ω±7.5%
Voice Coil Inductance 0.03 mH
Mechanical Q Factor 3.08
Electrical Q Factor 0.85
Total Q Factor 0.67
Ratio 167.77 fs/Qts
Energy Bandwidth Product ((1/Qes)•fs)
Suspension Compliance 954.6 μm/N
Effective Cone Diameter 5.2 cm
Motor Efficiency Factor 1.7 (T•m2)/Ω
Voice Coil Former Material ASV
Transducer Mass 0.34 Kg
Equivalent Volume 0.61 L

This 2.5 inch 4 ohm member of the PLS family sets a high standard, for compact full range drivers intended for applications such as television soundbars and compact music systems. Design features in this family include a stiff steel basket with venting under the spider to aid cooling of the motor, a ferrite magnet motor with copper cap to lower coil inductance, providing low distortion at low frequencies and extended high frequency response. A black anodized aluminium cone is employed on the driver, along with a black anodized aluminium dust cap coupled directly to the voice coil. Additionally, the cones come equipped with special-designed large roll rubber surrounds, which allow for a dynamic linear response to high excursion input signals.